Demo Emotiva & Integra 11 Channel AV Combo - Ultra Sound & Vision
Demo Emotiva & Integra 11 Channel AV Combo - Ultra Sound & Vision
Demo Emotiva & Integra 11 Channel AV Combo - Ultra Sound & Vision
Demo Emotiva & Integra 11 Channel AV Combo - Ultra Sound & Vision

    Demo Emotiva & Integra 11 Channel AV Combo

    R 89,990.00 R 149,980.00

      Demo Emotiva & Integra 11 Channel AV Combo

      Combo includes:

      1 x Demo Integra DRC R1.1 11.2 AV Processor

      1x Demo Emotiva XPA-11 Gen3 11 Channel Power Amp

       

      Integra DRC R1.1 11.2 Channel AV Processor

      Advanced Features

      • THX® Certifi ed Ultra™ for Theater Reference Sound
      • Enhanced HDBaseT™ LAN Connection Supporting HDCP 2.2-compliant 4 K / 60 Hz / 4:4:4 Video Transmission and POC (Power Over Cable) in Combination with Optional HDB-RX1 HDBaseT Receiver, IR and RS-232C Control
      • Supports Dolby Atmos® and DTS:X™ Formats Up to 7.2.4 Channels
      • HDMI® 8 In (1 Front*1), Main Out, and Sub / Zone 2 Out with HDCP 2.2, 4 K / 60 Hz, Dolby Vision™, HDR 10, HLG (Hybrid Log-Gamma), WCG (Wide Color Gamut), Extended Colorimetry (sYCC601, Adobe RGB, Adobe YYC601), and BT.2020 Video Pass-through
      • AccuEQ Auto Speaker Calibration Technology with Standing Wave Elimination and User-Defi nited Customizable Filters
      • AccuRefl ex Phase Alignment Technology for Dolby Atmos-enabled Speakers
      • Chromecast bulit-in Wireless Audio Platform and Google Assistant Voice Control Support
      • DTS Play-Fi® Multi-room Hi-Fi Music Streaming Capability
      • AirPlay Audio Streaming from iTunes and iPad, iPhone, and iPod touch
      • Spotify® Connect, TIDAL, TuneIn, Pandora®, and Deezer Services*2 Components and Speakers
      • Integra Control Pro App for iOS and Android™ Devices*4 Enables Easy Initial Setup, Multiroom Management, and System Control
      • Plays Hi-Res Audio Files Including DSD Direct 11.2 MHz Stereo, 192 / 24 PCM, Dolby® TrueHD*5, FLAC, WAV, ALAC, AIFF, MP3, and AAC via Network and USB Input
      • 192 kHz Audio Scaling and Upsampling Mode for Wider Dynamic Range and Enhanced Detail Resolution
      • Direct Mode for Audio Reproduction Close to Original Source Quality

       

      Emotiva XPA-11 Gen3 Power Amplifier

      Audio Specifications

      The XPA-11 Gen3 features three of our High-Powered Single Channel Modules and four of our Stereo Modules.  

      Audio Specifications (High-Powered Single Channel Modules):

      Power Output:
      300 watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 8 Ohms; one channel driven.
      550 watts RMS/channel; 20 Hz – 20 kHz; THD<0.2%; 4 Ohms; one channel driven.
      300 watts RMS/channel; THD<0.1%; 8 Ohms; two channels driven.
      490 watts RMS/channel; THD<0.1%; 4 Ohms; two channels driven.

      Power Bandwidth (at rated power; 4 Ohm - 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.1 dB).

      Broad Band Frequency Response: 5 Hz to 80 kHz +0/-2 dB.

      THD + noise: < 0.005%; at 100 watts RMS; 1 kHz; 8 Ohms.

      Signal to Noise Ratio (8 Ohm load):
      > 115 dB; ref FTC rated power; unbalanced input (A-weighted).
      > 86 dB; ref 1 watt; unbalanced input (A-weighted).

      Minimum Recommended Load Impedance (per channel): 4 Ohms
      (which equals one 4 Ohm load or two paralleled 8 Ohm loads).

      Damping Factor (8 Ohm load): > 500.

      Input Sensitivity (for rated power; 8 Ohm load): 1.5 V.

      Gain: 29 dB.

      • Maximum Power Consumption: 2,600 watts.
        Note: The values shown refer to the amount of power the amplifier would 
        consume while playing test tones continuously, on all channels, at full power, into a load bank. Therefore they are not at all characteristic of what you would expect when playing music or the sound track from a movie. Normal audio signals are dynamic, so the amount of power they require from second to second varies widely, and the average is far lower than this. With normal content, even playing very loudly, one of our amplifiers will consume far less power than indicated in the chart, so these values should not be considered to be a circuit requirement for normal operation. 

      Input Impedance:
      33 kOhms (balanced).
      23.5 kOhms (unbalanced).

       

      Audio Specifications (Stereo Modules):

      Power Output:
      65 watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 8 Ohms; one channel driven.
      100 watts RMS/channel; 20 Hz – 20 kHz; THD<0.2%; 4 Ohms; one channel driven.
      65 watts RMS/channel; THD<0.1%; 8 Ohms; two channels driven.
      100 watts RMS/channel; THD<0.1%; 4 Ohms; two channels driven.

      Power Bandwidth (at rated power; 4 Ohm - 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.1 dB).

      Broad Band Frequency Response: 50 Hz to 80 kHz +0/-1.5 dB.

      THD + noise: < 0.02%; at 60 watts RMS; 1 kHz; 8 Ohms

      Signal to Noise Ratio (8 Ohm load):
      > 105 dB; ref FTC rated power; unbalanced input (A-weighted).
      > 85 dB; ref 1 watt; unbalanced input (A-weighted).

      Minimum Recommended Load Impedance (per channel): 4 Ohms
      (which equals one 4 Ohm load or two paralleled 8 Ohm loads).

      Damping Factor (8 Ohm load): > 500.

      Input Sensitivity (for rated power; 8 Ohm load): 0.8 V (800 mV).

      Gain: 29 dB.

      Input Impedance:
      33 kOhms (balanced).
      23.5 kOhms (unbalanced).

      Input And Output Connections

      Input Connections (High-Powered Single Channel Modules):
      Unbalanced (RCA); balanced (XLR); one each per channel, independently selectable.

      Input Connections (Stereo Modules):
      2 Unbalanced (RCA); 2 balanced (XLR); two per channel, independently selectable.

      Speaker Output Connections: Audiophile grade, gold plated, 5-way binding posts.

      Trigger:
      Trigger Input: 5 – 12 V (AC or DC); <10 mA input current required.
      Trigger Output: 12 VDC; can drive any load up to 120 mA.

      Power Requirements

      Between 100 VAC and 250 VAC @ 50 / 60 Hz (automatically detected).

      Front Panel Controls and Indicators

      Standby: push button (halo ring changes color to indicate Standby or On).

      Status LEDs: one per channel; blue.
      Status LEDs change to red to indicate a fault condition.

      Rear Panel Controls

      AC Power switch: rocker switch (switches AC main power).

      Status LEDs switch: disables front panel Status LEDs and dims Standby button halo.

      Input selector switches (one per channel): 
      metal toggle switches; select between balanced and unbalanced inputs.

      Circuit Breaker: press button to reset circuit breaker.

      Protection

      The XPA Gen3 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions.

      Mechanical

      Dimensions:
      17” wide x 8” high x 19” deep (unboxed; including feet).
      17” wide x 7” high x 19” deep (unboxed; without feet).
      24-1/2” wide x 12” high x 24-3/4” deep (boxed).

      Weight:
      53 lbs (unboxed).
      58 lbs (boxed).

      Color: Blue, Purple, White
      Size: 20, 24
      Material: 100% Polyester

      RECENTLY VIEWED PRODUCTS