Emotiva XPA-11 Gen3 Home Theatre Power Amplifier - Ultra Sound & Vision
Emotiva XPA-11 Gen3 Home Theatre Power Amplifier - Ultra Sound & Vision
Sold Out

    Emotiva XPA-11 Gen3 Home Theatre Power Amplifier

    R 56,990.00
    Tax included.

      The new XPA-11 is an eleven-channel audiophile quality power amplifier. The XPA-11 is populated with three of our High-Powered Single Channel Modules, and four of our Stereo Modules, for a total of three high-powered channels and eight lower-powered channels. This combination is ideal for a surround sound system that is used for both music and home theater listening, and includes height speakers. The three front speakers, which are the most critical for both music and home theater listening, are powered by the three high-powered channels. The surround channels, and the height channels, are driven by the lower powered stereo modules. Even though the channels differ in terms of maximum power output, they feature perfectly matched electrical characteristics, and the same superb Class A/B sound quality.

      Circuit Topology

      The XPA-11 Gen3 is a fully modular audio power amplifier with a high-efficiency switch mode power supply (SMPS), independent, fully discrete, dual differential, high current, short signal path Class A/B amplifier modules, Optimized Class H™ power supply topology, and microprocessor-controlled fault protection.

      The XPA-11 is powered by a high efficiency, audiophile grade, Switch Mode Power Supply (SMPS).

      Audio Specifications

      The XPA-11 Gen3 features three of our High-Powered Single Channel Modules and four of our Stereo Modules.

      Audio Specifications (High-Powered Single Channel Modules):

      Power Output:

      300 watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 8 Ohms; one channel driven.
      550 watts RMS/channel; 20 Hz – 20 kHz; THD<0.2%; 4 Ohms; one channel driven.
      300 watts RMS/channel; THD<0.1%; 8 Ohms; two channels driven.
      490 watts RMS/channel; THD<0.1%; 4 Ohms; two channels driven.

      Power Bandwidth (at rated power; 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.1 dB).

      Broad Band Frequency Response: 5 Hz to 80 kHz +0/-2 dB.

      THD + noise: < 0.005%; at 100 watts RMS; 1 kHz; 8 Ohms.

      Signal to Noise Ratio (8 Ohm load):
      > 115 dB; ref FTC rated power; unbalanced input (A-weighted).
      > 86 dB; ref 1 watt; unbalanced input (A-weighted).

      Minimum Recommended Load Impedance (per channel): 4 Ohms
      (which equals one 4 Ohm load or two paralleled 8 Ohm loads).

      Damping Factor (8 Ohm load): > 500.

      Input Sensitivity (for rated power; 8 Ohm load): 1.5 V.

      Gain: 29 dB.

      Input Impedance:
      33 kOhms (balanced).
      23.5 kOhms (unbalanced).

      Audio Specifications (Stereo Modules)

      Power Output:
      65 watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 8 Ohms; one channel driven.
      100 watts RMS/channel; 20 Hz – 20 kHz; THD<0.2%; 4 Ohms; one channel driven.
      65 watts RMS/channel; THD<0.1%; 8 Ohms; two channels driven.
      100 watts RMS/channel; THD<0.1%; 4 Ohms; two channels driven.

      Power Bandwidth (at rated power; 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.1 dB).

      Broad Band Frequency Response: 50 Hz to 80 kHz +0/-1.5 dB.

      THD + noise: < 0.02%; at 60 watts RMS; 1 kHz; 8 Ohms

      Signal to Noise Ratio (8 Ohm load):
      > 105 dB; ref FTC rated power; unbalanced input (A-weighted).
      > 85 dB; ref 1 watt; unbalanced input (A-weighted).

      Minimum Recommended Load Impedance (per channel): 4 Ohms
      (which equals one 4 Ohm load or two paralleled 8 Ohm loads).

      Damping Factor (8 Ohm load): > 500.

      Input Sensitivity (for rated power; 8 Ohm load): 0.8 V (800 mV).

      Gain: 29 dB.

      Input Impedance:
      33 kOhms (balanced).
      23.5 kOhms (unbalanced).

      Input And Output Connections

      Input Connections (High-Powered Single Channel Modules):
      Unbalanced (RCA); balanced (XLR); one each per channel, independently selectable.

      Input Connections (Stereo Modules):
      2 Unbalanced (RCA); 2 balanced (XLR); two per channel, independently selectable.

      Speaker Output Connections: Audiophile grade, gold plated, 5-way binding posts.

      Trigger:
      Trigger Input: 5 – 12 V (AC or DC); <10 mA input current required.
      Trigger Output: 12 VDC; can drive any load up to 120 mA.

      Power Requirements

      Between 100 VAC and 250 VAC @ 50 / 60 Hz (automatically detected).

      Front Panel Controls and Indicators

      Standby: push button (halo ring changes color to indicate Standby or On).

      Status LEDs: one per channel; blue.
      Status LEDs change to red to indicate a fault condition.

      Rear Panel Controls

      AC Power switch: rocker switch (switches AC main power).

      Status LEDs switch: disables front panel Status LEDs and dims Standby button halo.

      Input selector switches (one per channel):
      metal toggle switches; select between balanced and unbalanced inputs.

      Circuit Breaker: press button to reset circuit breaker.

      Protection

      The XPA Gen3 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions.

      Mechanical

      Dimensions:
      17” wide x 8” high x 19” deep (unboxed; including feet).
      17” wide x 7” high x 19” deep (unboxed; without feet).
      24-1/2” wide x 12” high x 24-3/4” deep (boxed).

      Weight:
      53 lbs (unboxed).
      58 lbs (boxed).

      RECENTLY VIEWED PRODUCTS