Denon PMA-3000NE Stereo Integrated Amplifier
R 83,290.00
Taxes included.
Shipping calculated at checkout.
Standard delivery within 2–5 business days
Product Description
Product Description
Care
Care
Shipping & Returns
Shipping & Returns
Denon PMA-3000NE Stereo Integrated Amplifier
The Denon PMA-3000NE is the flagship integrated stereo amplifier in the NE series — designed and manufactured at Denon’s Shirakawa facility in Japan, and tuned by the Denon Sound Master. Delivering 160W per channel into 4Ω (80W into 8Ω) through an advanced Ultra-High Current (UHC) single push-pull amplifier circuit, with Ultra AL32 Processing, a dual MM/MC phono stage, USB-DAC, and balanced XLR inputs and outputs, the PMA-3000NE is built for those who demand the absolute best in analogue and digital audio reproduction.
Key Features
- 160W Per Channel (4Ω) / 80W Per Channel (8Ω): Advanced Ultra-High Current (UHC) single push-pull circuit drives even the most demanding speakers with authority and control.
- Ultra AL32 Processing: The most advanced iteration of Denon’s AL32 data interpolation technology, supporting up to 384kHz/32-bit for richly expressive, faithful playback.
- MM & MC Phono Stage: Dual moving magnet and moving coil phono equaliser for direct turntable connectivity with any cartridge type.
- USB-DAC: Built-in USB-B DAC supporting hi-res PCM up to 192kHz/24-bit and DSD 2.8MHz/5.6MHz for direct computer audio connection.
- Balanced XLR Inputs & Outputs: True balanced signal path for noise-free connection to balanced sources and power amplifiers.
- Hi-Res Audio Certified: Decodes FLAC, ALAC, and WAV up to 192kHz/24-bit, plus DSD 2.8MHz and 5.6MHz.
- Digital Inputs: Optical and coaxial digital inputs supporting PCM up to 192kHz/24-bit.
- Pure Direct & Analogue Mode: Bypass digital processing and tone controls for a pure, uncoloured signal path.
- 2 Pairs of Speaker Outputs (A/B): Drive two sets of speakers independently or simultaneously.
- Headphone Output: Front-panel 6.3mm headphone jack with dedicated amplification.
- Made in Japan: Designed and manufactured at Denon’s Shirakawa facility and tuned by the Denon Sound Master.
Specifications
| Specification | Detail |
|---|---|
| Amplifier | |
| Channels | 2 (Stereo) |
| Output Power (8Ω, 20Hz–20kHz, THD 0.07%) | 80W per channel |
| Output Power (4Ω, 1kHz, THD 0.7%) | 160W per channel |
| Frequency Response | 10Hz – 100kHz |
| Total Harmonic Distortion | 0.01% (20Hz – 20kHz) |
| Signal-to-Noise Ratio (IHF-A weighted) | 115 dB |
| Damping Factor | 120 (8Ω, 1kHz) |
| Amplifier Circuit | Advanced UHC Single Push-Pull |
| Digital Audio & DAC | |
| USB-DAC Input | Yes (USB-B) |
| Ultra AL32 Processing | Yes (up to 384kHz / 32-bit) |
| Hi-Res Audio Support | FLAC / ALAC / WAV up to 192kHz / 24-bit |
| DSD Audio Support | Yes (2.8MHz / 5.6MHz) |
| Digital Input Sample Rate | Up to 192kHz / 24-bit |
| Phono Stage | |
| Phono Input: MM / MC | Yes / Yes |
| MM Input Sensitivity | 2.5 mV / 47 kΩ |
| MC Input Sensitivity | 0.3 mV / 100 Ω |
| Signal-to-Noise Ratio (MM) | 86 dB |
| Signal-to-Noise Ratio (MC) | 72 dB |
| Inputs | |
| Analogue Inputs (RCA) | 4 |
| Balanced Input (XLR) | 1 |
| Phono Input (MM / MC) | Yes / Yes |
| Digital Optical Input | 2 |
| Digital Coaxial Input | 2 |
| USB-B Input | 1 |
| Outputs | |
| Speaker Outputs | 2 pairs (A / B) |
| Pre-Out (RCA) | 1 pair |
| Balanced Output (XLR) | 1 pair |
| Headphone Output | Yes (6.3mm front panel) |
| Gold-Plated Connectors | Yes |
| Sound Controls | |
| Pure Direct | Yes |
| Analogue Mode | Yes |
| Tone Controls (Bass / Treble) | ±10 dB |
| Balance Control | Yes |
| Speaker A/B Selection | Yes |
| General | |
| Available Colours | Premium Silver / Black |
| Manufactured | Japan (Shirakawa) |
| Metal Front Panel | Yes |
| Remote Control | Included |
| Auto Power Off | Yes |
| Power Consumption | 380W |
| Standby Consumption | 0.3W |
| Dimensions (W × H × D) | 434 × 151 × 406 mm |
| Weight | 21.7 kg |
Specifications sourced from Denon. Subject to change without notice. Please refer to the official Denon product page for the most current specifications.
Caring for your Speakers and Amplifiers
To Keep your equipment safe these are some best practices to note. Please be advised that this is only to reduce the risk of misuse and is not an exhaustive list.
Speakers
- Speaker terminals are marked red and black, ensure your amplifier to the speakers are wired on the same colours
- Ensure no loose speaker wire from the red touches a loose wire from the black as this will lead to a short circuit and damage either the speaker, the amplifier or both.
- Not all speakers are designed to play at max volume, kindly consider the pairing of your amplifier and speakers
- Speaker cabinets cannot be replaced please handle with care.
AV & Stereo Amplifiers
- If your amplifier has HDMI ports, ensure all devices are off before plugging in the HDMI cable
- Turn off the amplifier before swoping out or adding speaker cable
- Amplifiers generate heat, place them in a well ventilated space. if possible avoid having anything on top of the unit.
- adding a surge protector can assist with power dips which are likely to damage your devices. Isotek and Furman are industry standard.
- Dusty environments can sometimes lead to accumulation of dust in the electronic components that might affect heat regulation
Shipping & Returns
- Free shipping on orders over R500 within the country.
- Standard delivery within 2–5 business days. Delays will be communicated. This might vary slightly depending on your location.
- Return items in original condition for a full refund. (unopened state)
- Returns that are open/unboxed will be subject to a handling fee. Refunds will only be processed after testing the unit.