McIntosh MT2 Precision Turntable
Taxes included.
Shipping calculated at checkout.
Standard delivery within 2–5 business days
Request Quote
Ask for a price, product details or a supply-and-install quote. We'll reply with the details for this exact product.
McIntosh MT2 Precision Turntable
- Moving Magnet phono cartridge
- Includes dust cover
The McIntosh MT2 Precision Turntable combines the latest in turntable technology and design to deliver both superb performance and accurate playback. The MT2 is a great way to upgrade your home audio system to play vinyl albums. A full complement of features allows for all recordings to be reproduced with flawless realism. Its advanced electronic and mechanical design will give you many years of smooth, trouble-free operation. A subtle green glow emanates from under the platter and the outside edges of the plinth for a touch of refined ambiance.
The MT2 plays both 33-1/3 and 45 rpm records. It’s virtually ready to use out of the box with just a few setup steps to complete and then you’ll be enjoying your vinyl in no time.
The MT2 comes with a Sumiko Moonstone cartridge, a next-gen moving magnet phono pickup. The Moonstone phono cartridge is dressed to impress. It has low moving-mass and output, and is topped off with their listen-tested 0.3 x 0.7 mil elliptical diamond. Moonstone transcribes sonic imagery with weight, richness, depth, and keenly realistic texture. The sonic image is suspended and well-controlled over a nearly-absent noise floor, providing fantastic clarity without etch nor confusion.
Specifications
Cartridge Specifications |
|
| Cartridge Type | Moving Magnet |
| Output Level | 3.0 mV at 5 cm/s |
| Load Impedance | 47K Ohms recommended (Preamp MM Input) |
| Frequency Response | 12Hz to 33kHz |
| Channel Separation | 30dB at 1kHz |
| Compliance | 12 x 10-6 cm/dyne |
| Recommended Tracking Force | 2.0 g |
| Channel Difference | 0.5dB at 1kHz |
| Total Mass | 6.5 g |
| Stylus | Elliptical Diamond |
| Cantilever Material | Aluminum |
Tonearm Specifications |
|
| Bearing | Sapphire and Ceramic |
| Arm Tube | Dural-Aluminum |
| Counterweight | Eccentric |
| Adjustments | Vertical Tracking Angle, Antiskate, Azimuth |
Turntable Specifications |
|
| Playback Speeds | 33-1/3 and 45 rpm |
| Motor Type | DC Motor with Stainless Steel Brushes |
| Speed Control | Servo System |
| Platter | Dynamically balanced polyoxymethylene (POM) |
| Platter Bearing | Polished and tempered steel shaft in sintered bronze bushings |
| Signal To Noise Ratio | 35dB - 40dB |
| Wow & Flutter | 0.15% - 0.25% |
Connectivity |
|
| Stereo Outputs Unbalanced | 1 |
Control |
|
| Power Control Input | 0 |
| Power Control Output | 0 |
| Platter Light | N/A |
| Speed Control Fine Adjustment | Yes |
General Specifications |
|
| Dust Cover Included | Yes |
Weights & Dimensions |
|
| Unit Dimensions (W x H x D) | 17-13/16" (45.2cm) x 5" (12.7cm) (6" (15.2cm) with dust cover) x 17" (43.2cm) Note: Tone Arm Height will vary depending on the type of Cartridge installed. |
| Unit Weight | 29 lbs (13.2 kg) |
| Shipping Weight | 39 lbs (17.6 kg) |
Caring for your Speakers and Amplifiers
To Keep your equipment safe these are some best practices to note. Please be advised that this is only to reduce the risk of misuse and is not an exhaustive list.
Speakers
- Speaker terminals are marked red and black, ensure your amplifier to the speakers are wired on the same colours
- Ensure no loose speaker wire from the red touches a loose wire from the black as this will lead to a short circuit and damage either the speaker, the amplifier or both.
- Not all speakers are designed to play at max volume, kindly consider the pairing of your amplifier and speakers
- Speaker cabinets cannot be replaced please handle with care.
AV & Stereo Amplifiers
- If your amplifier has HDMI ports, ensure all devices are off before plugging in the HDMI cable
- Turn off the amplifier before swoping out or adding speaker cable
- Amplifiers generate heat, place them in a well ventilated space. if possible avoid having anything on top of the unit.
- adding a surge protector can assist with power dips which are likely to damage your devices. Isotek and Furman are industry standard.
- Dusty environments can sometimes lead to accumulation of dust in the electronic components that might affect heat regulation
Shipping & Returns
- Free shipping on orders over R500 within the country.
- Standard delivery within 2–5 business days. Delays will be communicated. This might vary slightly depending on your location.
- Return items in original condition for a full refund. (unopened state)
- Returns that are open/unboxed will be subject to a handling fee. Refunds will only be processed after testing the unit.