Mola Mola Perca Stereo Power Amplifier
Taxes included.
Shipping calculated at checkout.
Standard delivery within 2–5 business days
Mola Mola Perca Stereo Power Amplifier
Small sized and versatile
The Mola Mola Perca is a stereo power amplifier in our well-known half size chassis. Capable of delivering 150 Watts into an 8 Ohm load and doubling down to 300 Watts into 4 Ohm, it will drive any loudspeaker with ease, refinement, and clarity.
The ultra-low distortion class A input stages are implemented on a separate board, together with their own high performance voltage regulation.
Taking the NCORE® technology from our mother company Hypex Electronics as a reference point we set out to refine our Class D, self-oscillating principle and feedback concept, resulting in our proprietary Mola Mola Trajectum platform which is also applied in the Mola Mola Kula integrated amplifier.
To cater to a wider range of applications a new gain selection feature is added which enables switching between 22dB and 28dB. The Mola Mola Perca features selectable balanced and single ended inputs, Furutech binding posts, and an on/off trigger connector.
Key features
Power: 2x 150W 8Ohm 2x 300W 4Ohm
Gain: 22dB or 28dB
Signal/noise ratio: 128dB
Distortion (THD and IMD): <0,0003%
Input impedance: 100kOhm
Output impedance: 2m Ohm (Or Damping factor >4000)
Bandwidth: 100kHz
Caring for your Speakers and Amplifiers
To Keep your equipment safe these are some best practices to note. Please be advised that this is only to reduce the risk of misuse and is not an exhaustive list.
Speakers
- Speaker terminals are marked red and black, ensure your amplifier to the speakers are wired on the same colours
- Ensure no loose speaker wire from the red touches a loose wire from the black as this will lead to a short circuit and damage either the speaker, the amplifier or both.
- Not all speakers are designed to play at max volume, kindly consider the pairing of your amplifier and speakers
- Speaker cabinets cannot be replaced please handle with care.
AV & Stereo Amplifiers
- If your amplifier has HDMI ports, ensure all devices are off before plugging in the HDMI cable
- Turn off the amplifier before swoping out or adding speaker cable
- Amplifiers generate heat, place them in a well ventilated space. if possible avoid having anything on top of the unit.
- adding a surge protector can assist with power dips which are likely to damage your devices. Isotek and Furman are industry standard.
- Dusty environments can sometimes lead to accumulation of dust in the electronic components that might affect heat regulation
Shipping & Returns
- Free shipping on orders over R500 within the country.
- Standard delivery within 2–5 business days. Delays will be communicated. This might vary slightly depending on your location.
- Return items in original condition for a full refund. (unopened state)
- Returns that are open/unboxed will be subject to a handling fee. Refunds will only be processed after testing the unit.
