Audio-Technica AT-LPW50PB Fully Manual Belt-Drive Turntable
Taxes included.
Shipping calculated at checkout.
Standard delivery within 2–5 business days
Audio-Technica AT-LPW50PB – Fully Manual Belt-Drive Turntable (Piano Black)
The Audio-Technica AT-LPW50PB is a fully manual, belt-drive turntable engineered for optimal high-fidelity vinyl reproduction. Its anti-resonance 30 mm thick MDF plinth with high-gloss piano-black finish dampens low-frequency acoustical feedback, while a sensor-monitored DC servo motor ensures accurate platter rotation at 33-1/3 and 45 RPM.
The turntable ships with a straight, matte-finish carbon-fibre tonearm featuring hydraulically damped lift control, an AT-HS4 universal ½"-mount headshell, and the acclaimed AT-VM95E Dual Moving Magnet cartridge with a 0.3 × 0.7 mil elliptical stylus — upgradeable to any VM95 Series stylus for every budget and application. A built-in switchable phono preamplifier and detachable dual RCA cable allow direct connection to components with or without a dedicated phono input.
Key Features
- Fully manual belt-drive operation at 33-1/3 and 45 RPM
- DC servo motor with Active Speed Stabilization sensor system
- Straight, matte-finish carbon-fibre tonearm with hydraulically damped lift and lockable rest
- AT-HS4 universal ½"-mount headshell with AT-VM95E Dual Moving Magnet cartridge (black)
- 0.3 × 0.7 mil elliptical stylus; compatible with all VM95 Series replacement styli
- Anti-resonance 30 mm MDF plinth with high-gloss piano-black finish
- Professional die-cast aluminium platter with rubber mat
- Adjustable dynamic anti-skate control
- Built-in switchable phono/line preamplifier (RIAA equalised)
- High-isolation, height-adjustable feet
- External AC adapter for reduced chassis noise
Specifications
| Model | AT-LPW50PB |
| Drive Type | Belt drive |
| Operation | Fully manual |
| Motor | DC servo with Active Speed Stabilization |
| Speeds | 33-1/3 RPM, 45 RPM |
| Platter | Die-cast aluminium with rubber mat |
| Wow & Flutter | < 0.15% WRMS (33-1/3 RPM) at 3 kHz |
| Signal-to-Noise Ratio | > 60 dB |
| Output Level (PHONO) | 4.0 mV nominal at 1 kHz, 5 cm/sec |
| Output Level (LINE) | 200 mV nominal at 1 kHz, 5 cm/sec |
| Phono Preamp Gain | 35 dB nominal, RIAA equalised |
| Tonearm Type | Static-balanced straight carbon-fibre |
| Effective Arm Length | 223.6 mm |
| Overhang | 18.6 mm |
| Tracking Error Angle | < 2° |
| Applicable Cartridge Weight | 12–17 g |
| Stylus Pressure Range | 0–3 g |
| Cartridge | AT-VM95E Dual Moving Magnet (black) |
| Stylus | 0.3 × 0.7 mil elliptical bonded |
| Replacement Stylus | AT-VMN95E BK |
| Power Supply | 100–240 V, 50/60 Hz, 0.5 A max (external AC adapter) |
| Dimensions with Dust Cover (W × D × H) | 420.0 × 356.0 × 126.0 mm (16.54" × 14.02" × 4.96") |
| Dimensions without Dust Cover (W × D × H) | 420.0 × 356.0 × 114.0 mm (16.54" × 14.02" × 4.49") |
| Weight | 5.56 kg (12.26 lbs) without dust cover |
| Included Accessories | Dust cover, dust cover hinges, die-cast aluminium platter, drive belt, rubber turntable mat, counterweight, AT-HS4 headshell, AT-VM95E cartridge (black), 45 RPM adapter, RCA audio cable (~1.0 m), AC adapter (~1.5 m) |
| UPC | 4961310158545 |
Caring for your Speakers and Amplifiers
To Keep your equipment safe these are some best practices to note. Please be advised that this is only to reduce the risk of misuse and is not an exhaustive list.
Speakers
- Speaker terminals are marked red and black, ensure your amplifier to the speakers are wired on the same colours
- Ensure no loose speaker wire from the red touches a loose wire from the black as this will lead to a short circuit and damage either the speaker, the amplifier or both.
- Not all speakers are designed to play at max volume, kindly consider the pairing of your amplifier and speakers
- Speaker cabinets cannot be replaced please handle with care.
AV & Stereo Amplifiers
- If your amplifier has HDMI ports, ensure all devices are off before plugging in the HDMI cable
- Turn off the amplifier before swoping out or adding speaker cable
- Amplifiers generate heat, place them in a well ventilated space. if possible avoid having anything on top of the unit.
- adding a surge protector can assist with power dips which are likely to damage your devices. Isotek and Furman are industry standard.
- Dusty environments can sometimes lead to accumulation of dust in the electronic components that might affect heat regulation
Shipping & Returns
- Free shipping on orders over R500 within the country.
- Standard delivery within 2–5 business days. Delays will be communicated. This might vary slightly depending on your location.
- Return items in original condition for a full refund. (unopened state)
- Returns that are open/unboxed will be subject to a handling fee. Refunds will only be processed after testing the unit.