M&K SUR55T Tripole Speaker Pair Black
Taxes included.
Shipping calculated at checkout.
Standard delivery within 2–5 business days
M&K SUR55T Tripole Speaker Pair Black
The SUR55T is the most compact THX Tripole® solution we offer and is timbre-matched to any of the 750 Series speakers.
An ultra-compact speaker featuring our new 750 Series components, together with 2 dedicated side drivers operating in a dipole fashion,
providing the most optimal cinematic surround sound available.
Featuring two 3” mid-tweeters on each side of the speaker oriented in dipole fashion, combined with the front-mounted 1” soft-dome tweeter and a 5.25” mid-woofer direct radiating, the SUR55T provides even distribution of sound throughout the listening area with pinpoint accuracy and an enveloping sound field.
The NEW Miller & Kreisel 750 Series takes the THX Select category to new a level and we are proud to introduce a true acoustic upgrade, in the form of our own customized Danish designed and produced tweeters.
We’ve taken the innovative high-performance technologies from the S150 Series and integrated them into the NEW Miller & Kreisel 750 Series.
New Danish-designed high-performance tweeters
- 28 mm vented voice coils provide high power handling and extended linearity.
- 28 mm high-precision coated soft dome.
- Specially constructed resonance-damped tweeter magnet-system for precise transient control.
- Integrated waveguide combined with short horn load for wide dispersion and smooth frequency response.
- High-frequency prism system – Curved metal grill and angle tweeter for an optimized off-axis response as well as on-axis response.
New 5.25-inch woofers
- Aluminum distortion-killer rings for reduced distortion at high SPL levels.
- New extra-stiff coated fiberglass cone with special M&K profile geometry.
- Vented pole piece in magnet system for low compression performance.
- Vented voice coil for low compression.
New optimized crossovers
- Phase-focused crossover designs optimized for low crossover points and transient control.
- New proprietary M&K Sound interconnect cables
Sound
| Nominal system impedance: | 4 ohm (Z-min 4.2 ohm) |
| Frequency Response: | 80-20Khz (average response in-room +/- 3dB) |
| Frequency roll off: | 80 Hz (-6dB at 80 Hz near field) |
| Crossover Frequency: | 1.6 Khz (“Phase focused” 4th/2nd oder) |
| Tweeter: | 1,1″ Silk Coated Dome |
| Woofer: | 5.25″ Coated Glass Fibre |
| Power handling: | 100 watt (Long term IEC-268-5 (cycled input 87-20Khz) |
| Power handling: | 55 watt (Rated IEC-268-5 (constant input 87-20Khz) |
| Recommended Amplifier Power: | 25-200 watt (recommended amp power to drive speaker) |
| Sensitivity: | 85 dB (avarage SPL 2.83V/ 1mtr on axis 200-10Khz) |
| System princip: | Sealed enclosure |
| Connection: | Terminal gold plating (screw for 5 mm cable / Banana) Dimensions |
| Dimensions HxWxD: | 10.2 x 7 x 8.7” / 25.9 x 17.8 x 22.1 cm |
| Weight: | 10.25 lb / 4.7 kg |
Colors
Finish: Black Vinyl
Caring for your Speakers and Amplifiers
To Keep your equipment safe these are some best practices to note. Please be advised that this is only to reduce the risk of misuse and is not an exhaustive list.
Speakers
- Speaker terminals are marked red and black, ensure your amplifier to the speakers are wired on the same colours
- Ensure no loose speaker wire from the red touches a loose wire from the black as this will lead to a short circuit and damage either the speaker, the amplifier or both.
- Not all speakers are designed to play at max volume, kindly consider the pairing of your amplifier and speakers
- Speaker cabinets cannot be replaced please handle with care.
AV & Stereo Amplifiers
- If your amplifier has HDMI ports, ensure all devices are off before plugging in the HDMI cable
- Turn off the amplifier before swoping out or adding speaker cable
- Amplifiers generate heat, place them in a well ventilated space. if possible avoid having anything on top of the unit.
- adding a surge protector can assist with power dips which are likely to damage your devices. Isotek and Furman are industry standard.
- Dusty environments can sometimes lead to accumulation of dust in the electronic components that might affect heat regulation
Shipping & Returns
- Free shipping on orders over R500 within the country.
- Standard delivery within 2–5 business days. Delays will be communicated. This might vary slightly depending on your location.
- Return items in original condition for a full refund. (unopened state)
- Returns that are open/unboxed will be subject to a handling fee. Refunds will only be processed after testing the unit.