Onkyo M-80 Power Amplifier
Taxes included.
Shipping calculated at checkout.
Standard delivery within 2–5 business days
Onkyo M-80 Power Amplifier
The Onkyo M-80 is a reference-grade stereo power amplifier engineered for audiophiles who demand the ultimate in power, control, and sonic purity. Delivering 200 watts per channel into 8 ohms, it is built around Onkyo's WRAT (Wide Range Amplifier Technology) with a massive high-current toroidal transformer, fully balanced circuitry, and a dual-mono construction that ensures complete channel separation. Whether paired with the Onkyo P-3000R preamplifier or any high-quality preamp, the M-80 delivers an authoritative, effortless sound that brings your music to life.
Key Features
- 200 W x 2 channels (8 ohm, 20 Hz–20 kHz, 0.05% THD) — reference-grade stereo power
- Dual-mono construction with independent power supplies per channel for complete channel separation
- Balanced XLR and unbalanced RCA inputs for maximum flexibility and noise rejection
- WRAT (Wide Range Amplifier Technology) with high-current toroidal transformer for low-distortion, wide-bandwidth amplification
- Three-stage Darlington circuit with 10 output transistors per channel for high-current drive capability
- Instrumentation amplifier for superior common-mode noise rejection on balanced inputs
- Speaker A/B switching for two pairs of loudspeakers
- Trigger input for system integration and auto power-on
- Heavy-duty binding post speaker terminals for secure, low-resistance connections
- Soft-clipping circuit to protect speakers during high-level transients
Reference-Grade Engineering
The M-80's dual-mono architecture places a dedicated toroidal transformer, rectifier, and filter capacitor bank for each channel, eliminating crosstalk at the power supply level. The three-stage Darlington output stage with 10 transistors per channel delivers enormous current reserves, allowing the M-80 to drive even the most demanding loudspeakers with ease and composure. Fully balanced signal paths from XLR input to output stage ensure the lowest possible noise floor.
System Integration
The M-80 is designed to work seamlessly within a high-end separates system. A 12 V trigger input allows automatic power-on when paired with a compatible preamplifier or AV processor. Balanced XLR and unbalanced RCA inputs accommodate any source, and heavy-duty speaker binding posts accept bare wire, spades, or banana plugs.
Specifications
| Amplifier Section | |
| Power Output (Both Channels Driven) | 200 W/ch (8 ohm, 20 Hz–20 kHz, 0.05% THD) |
| Power Output (1-ch Driven) | 240 W/ch (8 ohm, 1 kHz, 0.05% THD) |
| Dynamic Power | 400 W (2 ohm) / 320 W (3 ohm) / 260 W (4 ohm) / 200 W (8 ohm) |
| THD+N | 0.05% (20 Hz–20 kHz, 8 ohm) |
| Input Sensitivity / Impedance (Balanced) | 1.0 V rms / 40 kohm (XLR) |
| Input Sensitivity / Impedance (Unbalanced) | 1.0 V rms / 20 kohm (RCA) |
| Frequency Response | 5 Hz–100 kHz / +0 dB, -3 dB |
| Signal-to-Noise Ratio | 120 dB (IHF-A, Balanced) | 116 dB (IHF-A, Unbalanced) |
| Damping Factor | 200 (8 ohm, 1 kHz) |
| Speaker Impedance | 4–16 ohm |
| Output Transistors | 10 per channel (Three-stage Darlington) |
| Amplifier Technology | WRAT (Wide Range Amplifier Technology) |
| Connectivity | |
| Balanced Inputs | 1 x XLR (per channel) |
| Unbalanced Inputs | 1 x RCA stereo |
| Speaker Outputs | 2 pairs (A/B) with heavy-duty binding posts |
| Trigger Input | 1 x 3.5 mm (12 V DC) |
| General | |
| Power Supply | AC 220–240 V~, 50/60 Hz |
| Power Consumption (Operating) | 600 W |
| Power Consumption (Standby) | 0.3 W |
| Dimensions (W x H x D) | 435 x 193 x 451 mm |
| Weight (Net) | 18.5 kg |
| Colour | Black |
| Supplied Accessories | Power cable, Quick Start Guide |
Caring for your Speakers and Amplifiers
To Keep your equipment safe these are some best practices to note. Please be advised that this is only to reduce the risk of misuse and is not an exhaustive list.
Speakers
- Speaker terminals are marked red and black, ensure your amplifier to the speakers are wired on the same colours
- Ensure no loose speaker wire from the red touches a loose wire from the black as this will lead to a short circuit and damage either the speaker, the amplifier or both.
- Not all speakers are designed to play at max volume, kindly consider the pairing of your amplifier and speakers
- Speaker cabinets cannot be replaced please handle with care.
AV & Stereo Amplifiers
- If your amplifier has HDMI ports, ensure all devices are off before plugging in the HDMI cable
- Turn off the amplifier before swoping out or adding speaker cable
- Amplifiers generate heat, place them in a well ventilated space. if possible avoid having anything on top of the unit.
- adding a surge protector can assist with power dips which are likely to damage your devices. Isotek and Furman are industry standard.
- Dusty environments can sometimes lead to accumulation of dust in the electronic components that might affect heat regulation
Shipping & Returns
- Free shipping on orders over R500 within the country.
- Standard delivery within 2–5 business days. Delays will be communicated. This might vary slightly depending on your location.
- Return items in original condition for a full refund. (unopened state)
- Returns that are open/unboxed will be subject to a handling fee. Refunds will only be processed after testing the unit.