Eversolo AMP-F2 Audio Power Amplifier
Taxes included.
Shipping calculated at checkout.
Standard delivery within 2–5 business days
Request Quote
Ask for a price, product details or a supply-and-install quote. We'll reply with the details for this exact product.
Dynamic power, detailed presentation. The Eversolo AMP-F2 is a compact, bridgeable stereo Class D power amplifier developed in collaboration between the Starke Sound team and Eversolo. It delivers 250 W RMS per channel into 4 Ω and up to 450 W RMS bridged into 2 Ω – an ideal partner for Eversolo's DMP streamers.
Starke Sound NS600 Amplifier Module
At its heart is the NS600 module designed by Starke Sound, with a sampling rate of up to 600 kHz. Paired with the SAPS audio-specific switch-mode power supply, it reduces noise and enhances dynamic performance through an efficient Class D topology with optimised circuitry. The AMP-F2 can be configured for 2-channel or bridged mono operation.
Vigorous Output, Bridged Support
Each channel delivers 250 W RMS into 4 Ω at 1% THD+N, and in bridged mode the AMP-F2 supports up to 450 W RMS into 2 Ω with THD+N below 1% – the ability to handle very low-impedance loads keeps the energy flowing with challenging speakers and dynamic low-frequency passages.
Accurate Sound with PurePath™ Ultra-HD
The NS600 module uses PurePath™ Ultra-HD technology and advanced integrated feedback with high-speed gate-driver error correction, achieving ultra-low distortion across the full audio band.
Powerful Power Drive
A 600 W high-efficiency, low-ripple, low-EMI switch-mode power supply delivers consistent, powerful current with extremely low noise.
Thoughtful Design
- Extremely low standby (0.5 W) and idle (14 W) power consumption, complying with European Union ErP standards
- Aluminium body with complete self-protection and anti-interference shielding
- Standard 12 V TRIGGER IN and OUT for synchronised power on/off with compatible devices – for example, connect the DMP-A6 using the supplied USB-to-trigger adapter cable
- Balanced XLR and RCA inputs, and beryllium-copper binding posts custom-made by Starke Sound
Specifications
| Output Power | 145W RMS at 8 ohms (1% THD) 250W RMS at 4 ohms (1% THD) 280W RMS at 4 ohms (1% THD, BTL) 450W RMS at 2 ohms (1% THD, BTL) |
|---|---|
| Gain | 21.5dB |
| Channel quantity | 2 |
| Amplifier type | Class D |
| Frequency Response | 10Hz-20KHz -1dB |
| Maximum output current per channel | 16.5A/33A(Bridge) |
| Signal-To-Noise Ratio (SNR) | >110dB, "A" weighted at 4 ohm 250W |
| THD | 0.003% 10W at 1KHz |
| Input terminals | 2-Channel RCA Input 2-Channel XLR Input |
| Input Impedance (RCA) | 11KΩ |
| Input Impedance (XLR) | 22KΩ |
| Input Sensitivity | 2.7V |
| Output terminals | 2 pairs beryllium copper binding post custom made by Starke Sound |
| Output Impedance | 0.136Ω(5 Hz to 100 kHz) |
| Minimum load impedance | 0.8Ω |
| True balance circuit | Yes |
| Heat | 65 BTU / hr |
| Power consumption | Standby ≤0.5W Idle ≤14W Maximum 900W |
| Control option | 12V trigger input & output |
| Cabinet | Aluminum (Black) |
| Size | 270x228x80 (mm) |
Specifications as published by Eversolo. Price is the recommended retail price incl. 15% VAT.
Caring for your Speakers and Amplifiers
To Keep your equipment safe these are some best practices to note. Please be advised that this is only to reduce the risk of misuse and is not an exhaustive list.
Speakers
- Speaker terminals are marked red and black, ensure your amplifier to the speakers are wired on the same colours
- Ensure no loose speaker wire from the red touches a loose wire from the black as this will lead to a short circuit and damage either the speaker, the amplifier or both.
- Not all speakers are designed to play at max volume, kindly consider the pairing of your amplifier and speakers
- Speaker cabinets cannot be replaced please handle with care.
AV & Stereo Amplifiers
- If your amplifier has HDMI ports, ensure all devices are off before plugging in the HDMI cable
- Turn off the amplifier before swoping out or adding speaker cable
- Amplifiers generate heat, place them in a well ventilated space. if possible avoid having anything on top of the unit.
- adding a surge protector can assist with power dips which are likely to damage your devices. Isotek and Furman are industry standard.
- Dusty environments can sometimes lead to accumulation of dust in the electronic components that might affect heat regulation
Shipping & Returns
- Free shipping on orders over R500 within the country.
- Standard delivery within 2–5 business days. Delays will be communicated. This might vary slightly depending on your location.
- Return items in original condition for a full refund. (unopened state)
- Returns that are open/unboxed will be subject to a handling fee. Refunds will only be processed after testing the unit.