McIntosh MT10 Precision Turntable
R 305,000.00
Taxes included.
Shipping calculated at checkout.
Standard delivery within 2–5 business days
Product Description
Product Description
Care
Care
Shipping & Returns
Shipping & Returns
McIntosh MT10 Precision Turntable
- Belt drive
- Moving Coil cartridge
- Illuminated speed meter
With tracking force, anti-skate and cartridge position preset at the factory, the McIntosh MT10 Precision Turntable delivers high performance LP playback with minimal set up. A custom tonearm features a rigid, dural-aluminum arm-tube gimbaled in two sapphire (horizontal) and two ceramic (vertical) bearings for the least possible friction. A .5mV moving coil cartridge is included, and features an ebony body with an elliptical stylus. Enjoy a new level of music with the MT10 turntable.
WATCH: Unboxing and Setting Up the McIntosh MT10 Precision Turntable
Specifications
Cartridge Specifications |
|
| Cartridge Type | Moving Coil, Low Output |
| Output Level | 0.5 mV at 5 cm/s |
| Load Impedance | 400 to 500 Ohms recommended |
| Frequency Response | 20Hz to 50kHz |
| Channel Separation | Greater than 30dB at 1Khz |
| Compliance | 6 x 10-6 cm/dyne |
| Recommended Tracking Force | 2.4 g |
| Channel Difference | Less than 0.3dB at 1kHz |
| Total Mass | 11 g |
| Stylus | Elliptical Diamond |
| Cantilever Material | Aluminum |
Tonearm Specifications |
|
| Bearing | Sapphire and Ceramic |
| Arm Tube | Dural-Aluminum |
| Counterweight | Eccentric |
| Adjustments | Vertical Tracking Angle, Antiskate, Azimuth |
Turntable Specifications |
|
| Playback Speeds | 33-1/3, 45 and 78 rpm |
| Motor Type | DC Brushless |
| Speed Control | Electronic w/ braking feature |
| Platter | Silicon Acrylic |
| Platter Bearing | Magnetic Suspended Ceramic |
| Signal To Noise Ratio | 41dB - 44dB |
| Wow & Flutter | 0.10% - 0.15% |
Connectivity |
|
| Stereo Outputs Unbalanced | 1 |
| Control Power Control Input | 1 |
| Power Control Output | 1 |
| Platter Light | Yes |
| Speed Control Fine Adjustment | Yes |
General Specifications |
|
| Dust Cover Included | No |
Weights & Dimensions |
|
| Unit Dimensions (W x H x D) | 17-1/2" (44.45cm) x 8-13/16" (22.38cm) x 21" (53.34cm) Note: Tone Arm Height will vary depending on the type of Cartridge installed. |
| Unit Weight | 42 lbs (19 kg) |
| Shipping Weight | 63 lbs (28.6 kg) |
Caring for your Speakers and Amplifiers
To Keep your equipment safe these are some best practices to note. Please be advised that this is only to reduce the risk of misuse and is not an exhaustive list.
Speakers
- Speaker terminals are marked red and black, ensure your amplifier to the speakers are wired on the same colours
- Ensure no loose speaker wire from the red touches a loose wire from the black as this will lead to a short circuit and damage either the speaker, the amplifier or both.
- Not all speakers are designed to play at max volume, kindly consider the pairing of your amplifier and speakers
- Speaker cabinets cannot be replaced please handle with care.
AV & Stereo Amplifiers
- If your amplifier has HDMI ports, ensure all devices are off before plugging in the HDMI cable
- Turn off the amplifier before swoping out or adding speaker cable
- Amplifiers generate heat, place them in a well ventilated space. if possible avoid having anything on top of the unit.
- adding a surge protector can assist with power dips which are likely to damage your devices. Isotek and Furman are industry standard.
- Dusty environments can sometimes lead to accumulation of dust in the electronic components that might affect heat regulation
Shipping & Returns
- Free shipping on orders over R500 within the country.
- Standard delivery within 2–5 business days. Delays will be communicated. This might vary slightly depending on your location.
- Return items in original condition for a full refund. (unopened state)
- Returns that are open/unboxed will be subject to a handling fee. Refunds will only be processed after testing the unit.