No Products in the Cart
The McIntosh MT2 Precision Turntable combines the latest in turntable technology and design to deliver both superb performance and accurate playback. The MT2 is a great way to upgrade your home audio system to play vinyl albums. A full complement of features allows for all recordings to be reproduced with flawless realism. Its advanced electronic and mechanical design will give you many years of smooth, trouble-free operation. A subtle green glow emanates from under the platter and the outside edges of the plinth for a touch of refined ambiance.
The MT2 plays both 33-1/3 and 45 rpm records. It’s virtually ready to use out of the box with just a few setup steps to complete and then you’ll be enjoying your vinyl in no time.
The MT2 comes with a Sumiko Moonstone cartridge, a next-gen moving magnet phono pickup. The Moonstone phono cartridge is dressed to impress. It has low moving-mass and output, and is topped off with their listen-tested 0.3 x 0.7 mil elliptical diamond. Moonstone transcribes sonic imagery with weight, richness, depth, and keenly realistic texture. The sonic image is suspended and well-controlled over a nearly-absent noise floor, providing fantastic clarity without etch nor confusion.
Cartridge Specifications |
|
Cartridge Type | Moving Magnet |
Output Level | 3.0 mV at 5 cm/s |
Load Impedance | 47K Ohms recommended (Preamp MM Input) |
Frequency Response | 12Hz to 33kHz |
Channel Separation | 30dB at 1kHz |
Compliance | 12 x 10-6 cm/dyne |
Recommended Tracking Force | 2.0 g |
Channel Difference | 0.5dB at 1kHz |
Total Mass | 6.5 g |
Stylus | Elliptical Diamond |
Cantilever Material | Aluminum |
Tonearm Specifications |
|
Bearing | Sapphire and Ceramic |
Arm Tube | Dural-Aluminum |
Counterweight | Eccentric |
Adjustments | Vertical Tracking Angle, Antiskate, Azimuth |
Turntable Specifications |
|
Playback Speeds | 33-1/3 and 45 rpm |
Motor Type | DC Motor with Stainless Steel Brushes |
Speed Control | Servo System |
Platter | Dynamically balanced polyoxymethylene (POM) |
Platter Bearing | Polished and tempered steel shaft in sintered bronze bushings |
Signal To Noise Ratio | 35dB - 40dB |
Wow & Flutter | 0.15% - 0.25% |
Connectivity |
|
Stereo Outputs Unbalanced | 1 |
Control |
|
Power Control Input | 0 |
Power Control Output | 0 |
Platter Light | N/A |
Speed Control Fine Adjustment | Yes |
General Specifications |
|
Dust Cover Included | Yes |
Weights & Dimensions |
|
Unit Dimensions (W x H x D) | 17-13/16" (45.2cm) x 5" (12.7cm) (6" (15.2cm) with dust cover) x 17" (43.2cm) Note: Tone Arm Height will vary depending on the type of Cartridge installed. |
Unit Weight | 29 lbs (13.2 kg) |
Shipping Weight | 39 lbs (17.6 kg) |