McIntosh MTI100 Integrated Turntable
R 167,990.00
Taxes included.
Shipping calculated at checkout.
Standard delivery within 2–5 business days
Request Quote
Ask for a price, product details or a supply-and-install quote. We'll reply with the details for this exact product.
Product Description
Product Description
Care
Care
Shipping & Returns
Shipping & Returns
MTI100 integrated turntable with amplifier (Single)
A turntable, vacuum tube preamplifier, phono preamplifier and amplifier in one unit, with Bluetooth and auxiliary inputs. Just add speakers. Priced and sold individually.
Description
A modern home audio system for modern lifestyles
A 7 pound (3.18 kg) machined aluminium platter and matching tonearm with anti-skate sit on a 3/8” (9.5mm) thick glass top over a 1/4” (6.35mm) metal plate, which helps resist external vibration.
A Class D amplifier rated at 80 Watts per channel into 4 Ohms or 50 Watts per channel into 8 Ohms drives your speakers (sold separately), with two 12AX7 vacuum tubes in the preamplifier. Analog and digital inputs, a Bluetooth receiver, subwoofer output and headphone jack are built in.
- Turntable, preamplifier and amplifier all in one
- Machined aluminium platter and tonearm with anti-skate
- Vacuum tube preamplifier and phono preamplifier
- Includes Bluetooth® and auxiliary inputs
- Subwoofer output and headphone jack
- Just add your music and speakers
Specifications
| Model | MTI100 |
| Pack Type | Single |
| Cartridge Specifications | |
| Cartridge Type | Moving Magnet |
| Output Level | 4mV at 1kHz |
| Load Impedance | 47k Ohms |
| Frequency Response | 12Hz to 30kHz |
| Channel Separation | 30dB at 1kHz |
| Compliance | 12 x 10-6 cm/dyne |
| Recommended Tracking Force | 2.0 g |
| Channel Difference | Less than 1dB at 1kHz |
| Total Mass | 6.5 g |
| Stylus | Elliptical |
| Cantilever Material | Aluminum |
| Tonearm Specifications | |
| Bearing | Cardan bearing arrangement with ball bearings used for lateral and Sapphire/Tungsten for vertical bearing |
| Arm Tube | Machined aluminum |
| Counterweight | Concentric |
| Adjustments | None |
| Turntable Specifications | |
| Playback Speeds | 33-1/3 and 45 rpm |
| Motor Type | Permanent magnet AC synchronous |
| Speed Control | Manual speed change via a 2 speed pulley |
| Platter | Aluminum |
| Platter Bearing | Inverted hardened steel shaft and axial ball arrangement with bronze bushing |
| Signal To Noise Ratio | 35dB - 40dB |
| Wow & Flutter | 0.1% |
| Connectivity | |
| Stereo Outputs Unbalanced | 1 (bridged to AMP IN) |
| Stereo Inputs Unbalanced | 1 |
| Digital Coaxial Input | 1 |
| Digital Optical Input | 1 |
| Subwoofer Output | 1 |
| Wireless Input | High Definition Bluetooth 4.2 |
| Control | |
| Power Control Inputs | 0 |
| Power Control Outputs | 1 |
| Speed Control Fine Adjustment | No |
| Electronic Specifications | |
| Power Output per Channel | 50 Watts into 8 Ohms 80 Watts into 4 Ohms |
| Number of Channels | 2 |
| Speaker Impedance | 4 or 8 Ohms |
| Rated Power Band | 20Hz to 20kHz |
| Total Harmonic Distortion | Amplifier: 0.2% maximum harmonic distortion at any level from 250 milliwatts to one-half of rated power output, 20Hz to 20kHz; 0.5% maximum harmonic distortion at any level from one-half to full rated power output, 20Hz to 20kHz Preamplifier: 0.2% from 20Hz to 20kHz |
| Dynamic Headroom | 1.0dB (8 Ohms) 1.3dB (4 Ohms) |
| Frequency Response +0,-0.7dB | 20Hz to 20kHz |
| Signal To Noise Ratio (Moving Magnet) | 75dB |
| Signal To Noise Ratio (High Level) | 90dB |
| Damping Factor | 8 Ohms: >200 4 Ohms: >100 |
| Maximum Output | 9V Unbalanced |
| General Specifications | |
| Dust Cover Included | No |
| Weights & Dimensions | |
| Unit Dimensions (W x H x D) | 19-1/4” (48.9cm) x 6-3/4” (17.15cm) x 14” (35.6cm) |
| Unit Weight | 33.5 lbs (15.2 kg) |
| Shipping Weight | 40.5 lbs (18.4 kg) |
Caring for your Speakers and Amplifiers
To Keep your equipment safe these are some best practices to note. Please be advised that this is only to reduce the risk of misuse and is not an exhaustive list.
Speakers
- Speaker terminals are marked red and black, ensure your amplifier to the speakers are wired on the same colours
- Ensure no loose speaker wire from the red touches a loose wire from the black as this will lead to a short circuit and damage either the speaker, the amplifier or both.
- Not all speakers are designed to play at max volume, kindly consider the pairing of your amplifier and speakers
- Speaker cabinets cannot be replaced please handle with care.
AV & Stereo Amplifiers
- If your amplifier has HDMI ports, ensure all devices are off before plugging in the HDMI cable
- Turn off the amplifier before swoping out or adding speaker cable
- Amplifiers generate heat, place them in a well ventilated space. if possible avoid having anything on top of the unit.
- adding a surge protector can assist with power dips which are likely to damage your devices. Isotek and Furman are industry standard.
- Dusty environments can sometimes lead to accumulation of dust in the electronic components that might affect heat regulation
Shipping & Returns
- Free shipping on orders over R500 within the country.
- Standard delivery within 2–5 business days. Delays will be communicated. This might vary slightly depending on your location.
- Return items in original condition for a full refund. (unopened state)
- Returns that are open/unboxed will be subject to a handling fee. Refunds will only be processed after testing the unit.