Mola Mola Kula Integrated Amplifier
Taxes included.
Shipping calculated at checkout.
Standard delivery within 2–5 business days
Request Quote
Ask for a price, product details or a supply-and-install quote. We'll reply with the details for this exact product.
Kula integrated amplifier (Single)
The Mola Mola Kula pairs the chassis and line stage of the Makua preamplifier with a Mola Mola amplifier rated at 2x 150W into 8 Ohm and 2x 300W into 4 Ohm. Priced and sold individually, with the DAC and phono stage available as add-on options.
Description
The integrated that belies its size
Kula is an à la carte modular design. Its chassis and line stage come from the Makua preamplifier, while the amplifier section is exclusive to Mola Mola and delivers 150 Watts into 8 Ohm, doubling to 300 Watts into 4 Ohm. Two pairs of Furutech binding posts are connected directly to the amplifier board with Kubala-Sosna cable.
The optional phono stage has independently adjustable settings, and the optional DAC section is identical to the stand-alone Tambaqui, with 5 digital inputs including a Roon endpoint and Bluetooth. With the DAC fitted the Kula is Roon Ready. Everything is set from 6 programmable presets, a Mola Mola remote or the Mola Mola Remote app.
- 2x 150W/8 Ohm, 2x 300W/4 Ohm
- Distortion (THD) @1kHz below 0.0004% at 100W/8R and 200W/4R
- Chassis and line stage shared with the Makua preamplifier
- 3 balanced and 3 unbalanced inputs, selectable by switch and software
- 2 pairs of Furutech binding posts wired to the amplifier board with Kubala-Sosna cable
- Optional DAC (as used in the Tambaqui) and phono stage modules
- Roon Ready when the DAC option is fitted
Specifications
| Model | Kula |
| Pack Type | Single |
| I/O | |
| Inputs | 3 balanced and 3 unbalanced inputs, selectable by switch and software |
| Speaker outputs | 2 Pairs of Furutech binding posts. Directly connected to the amplifier PCB using Kubala-Sosna cable. |
| Routing | All inputs routable through optional processor boards like the phono stage |
| Processing | Processing balance and input gain offset; phase invert and mono sum; full software control of routing and processing |
| Modes | Mastering mode |
| Performance | |
| Output power | 2x 150W/8 Ohm, 2x 300W/4 Ohm |
| Distortion (THD) @1kHz | 100W/8R & 200W/4R <0.0004% |
| Maximum input level | 20dBu (7.75Vrms) |
| Input sensitivity | 1.4 Vrms (analogue inputs) |
| Input impedance | 100kohm |
| Unweighted Signal/Noise Ratio | 113dB |
| Bandwidth | 50kHz @ -3dB |
| Gain range | -70 to +15 dB |
| Gain resolution | <1dB, better than 0.2dB over normal listening range |
| Control | |
| Presets | 6 programmable presets |
| Remote control | (premium) Remote control, Mola Mola Remote app |
| Network | Roon Ready (if DAC option fitted) |
| Add-On | |
| Optional modules | Mola Mola Phono stage, Mola Mola DAC |
| Dimensions and Weight | |
| Dimensions (W × H × D) | 420 × 110 × 370 mm, depth includes volume knob and connectors (product page); 435 × 110 × 340 mm (user's manual R4) |
| Weight | 11kg (product page); 9 kg (user's manual R4) |
| General | |
| Supply voltage | 90-135 / 180 – 270 Volt AC/47-63Hz (auto switching) |
| Power consumption | < 4 Watt (low power mode, wake on LAN), 390 Watt (max power) |
| Fuse | T6,3A 250V 5x20mm ceramic |
| What's in the box | Integrated amplifier (1), power cord (1) |
Caring for your Speakers and Amplifiers
To Keep your equipment safe these are some best practices to note. Please be advised that this is only to reduce the risk of misuse and is not an exhaustive list.
Speakers
- Speaker terminals are marked red and black, ensure your amplifier to the speakers are wired on the same colours
- Ensure no loose speaker wire from the red touches a loose wire from the black as this will lead to a short circuit and damage either the speaker, the amplifier or both.
- Not all speakers are designed to play at max volume, kindly consider the pairing of your amplifier and speakers
- Speaker cabinets cannot be replaced please handle with care.
AV & Stereo Amplifiers
- If your amplifier has HDMI ports, ensure all devices are off before plugging in the HDMI cable
- Turn off the amplifier before swoping out or adding speaker cable
- Amplifiers generate heat, place them in a well ventilated space. if possible avoid having anything on top of the unit.
- adding a surge protector can assist with power dips which are likely to damage your devices. Isotek and Furman are industry standard.
- Dusty environments can sometimes lead to accumulation of dust in the electronic components that might affect heat regulation
Shipping & Returns
- Free shipping on orders over R500 within the country.
- Standard delivery within 2–5 business days. Delays will be communicated. This might vary slightly depending on your location.
- Return items in original condition for a full refund. (unopened state)
- Returns that are open/unboxed will be subject to a handling fee. Refunds will only be processed after testing the unit.