Audio-Technica AT-LPW40WN Fully Manual Belt-Drive Turntable
Taxes included.
Shipping calculated at checkout.
Standard delivery within 2–5 business days
This product is not available for purchase online. Please call to enquire.
Audio-Technica AT-LPW40WN – Fully Manual Belt-Drive Turntable (Walnut)
The Audio-Technica AT-LPW40WN is a fully manual, belt-drive turntable engineered for optimal high-fidelity vinyl reproduction. Its anti-resonance MDF plinth with simulated walnut wood veneer dampens low-frequency acoustical feedback, while a sensor-monitored DC servo motor ensures accurate platter rotation at 33-1/3 and 45 RPM.
The turntable ships with a straight carbon-fibre tonearm featuring hydraulically damped lift control, an AT-HS4 universal ½"-mount headshell, and the acclaimed AT-VM95E Dual Moving Magnet cartridge with a 0.3 × 0.7 mil elliptical stylus — upgradeable to any VM95 Series stylus. A built-in switchable phono preamplifier and detachable dual RCA cable allow direct connection to components with or without a dedicated phono input.
Key Features
- Fully manual belt-drive operation at 33-1/3 and 45 RPM
- DC servo motor with speed-sensor system for accurate platter rotation
- Straight carbon-fibre tonearm with hydraulically damped lift control and lockable rest
- Adjustable dynamic anti-skate control
- AT-HS4 universal ½"-mount headshell with AT-VM95E Dual Moving Magnet cartridge
- 0.3 × 0.7 mil elliptical stylus; compatible with all VM95 Series replacement styli
- Anti-resonance MDF plinth with simulated walnut wood veneer finish
- Professional die-cast aluminium platter with rubber mat
- Built-in switchable phono/line preamplifier (RIAA equalised)
- External AC adapter for reduced chassis noise
- Detachable dual RCA output cable included
Specifications
| Turntable | |
|---|---|
| Type | Belt-drive, fully manual operation |
| Motor | DC servo motor with speed stability control |
| Drive Method | Belt drive |
| Speeds | 33-1/3 RPM, 45 RPM |
| Turntable Platter | Die-cast aluminium with rubber mat |
| Wow and Flutter | < 0.15% WRMS (33-1/3 RPM) at 3 kHz |
| Signal-to-Noise Ratio | > 60 dB |
| Output Level | PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec LINE: 200 mV nominal at 1 kHz, 5 cm/sec |
| Phono Pre-Amp Gain | 35 dB nominal, RIAA equalised |
| Power Supply | 100–240 V, 50/60 Hz (external AC adapter) |
| Tonearm | |
| Tonearm Type | Static-balanced straight carbon-fibre tonearm |
| Effective Arm Length | 223.6 mm |
| Overhang | 18.6 mm |
| Tracking Error Angle | < 2° |
| Applicable Cartridge Weight | 12–17 g |
| Stylus Pressure Range | 0–3 g |
| Cartridge | |
| Cartridge | Audio-Technica AT-VM95E Dual Moving Magnet |
| Stylus | 0.3 × 0.7 mil elliptical bonded stylus |
| Frequency Response | 20–20,000 Hz |
| Replacement Stylus | AT-VMN95E |
| General | |
| Dimensions (W × D × H) | 420 × 340 × 117 mm (16.54" × 13.39" × 4.61") |
| Weight | 5.0 kg (11.0 lbs) |
| Accessories Included | Dust cover · Dust cover hinges · Die-cast aluminium platter · Drive belt · Rubber turntable mat · Counterweight · AT-HS4 headshell · AT-VM95E stereo cartridge · 45-RPM adapter · RCA audio cable (approx. 1.0 m) · AC adapter (approx. 1.5 m) |
Caring for your Speakers and Amplifiers
To Keep your equipment safe these are some best practices to note. Please be advised that this is only to reduce the risk of misuse and is not an exhaustive list.
Speakers
- Speaker terminals are marked red and black, ensure your amplifier to the speakers are wired on the same colours
- Ensure no loose speaker wire from the red touches a loose wire from the black as this will lead to a short circuit and damage either the speaker, the amplifier or both.
- Not all speakers are designed to play at max volume, kindly consider the pairing of your amplifier and speakers
- Speaker cabinets cannot be replaced please handle with care.
AV & Stereo Amplifiers
- If your amplifier has HDMI ports, ensure all devices are off before plugging in the HDMI cable
- Turn off the amplifier before swoping out or adding speaker cable
- Amplifiers generate heat, place them in a well ventilated space. if possible avoid having anything on top of the unit.
- adding a surge protector can assist with power dips which are likely to damage your devices. Isotek and Furman are industry standard.
- Dusty environments can sometimes lead to accumulation of dust in the electronic components that might affect heat regulation
Shipping & Returns
- Free shipping on orders over R500 within the country.
- Standard delivery within 2–5 business days. Delays will be communicated. This might vary slightly depending on your location.
- Return items in original condition for a full refund. (unopened state)
- Returns that are open/unboxed will be subject to a handling fee. Refunds will only be processed after testing the unit.