Klipsch RF-7 III Floorstanding Speaker (Pair)
Taxes included.
Shipping calculated at checkout.
Standard delivery within 2–5 business days
Klipsch RF-7 III Floorstanding Speaker (Pair)
Legendary Klipsch performance. Titanium compression driver. Cerametallic woofers. Furniture-grade wood veneer.
Featuring an all-new titanium compression driver, 90x90 compressed molded-rubber Tractrix horn, redesigned bifurcated cabinet, cast basket Cerametallic woofers and finished in a premium, furniture-grade wood veneer — the RF-7 III floorstanding speaker champions Klipsch's legendary, high-performance sound.
 |
90° X 90° TRACTRIX® HORN The redesigned Tractrix Horn utilizes a circular horn throat paired to a square horn mouth to further improve high-frequency response and extension while enhancing imaging and dynamics. The compressed molded rubber construction adds high-frequency damping to reduce harshness and improve detail — creating the cleanest, most natural sound possible. |
|
ALL-NEW DRIVING FORCE — 1¾" TITANIUM DIAPHRAGM COMPRESSION DRIVER The compression driver features a new phase plug design to improve phase coherency at the throat of the horn, resulting in improved sound pressure linearity at high frequencies. |
 |
 |
NEW DUAL CHAMBER + TRACTRIX® PORT The RF-7 III's bifurcated enclosure allows each 10" driver and port to work independently, improving linearity of both drive systems and minimising standing wave problems inside the cabinet. Tractrix geometry ports allow for the most efficient air transfer from the cabinet — delivering the cleanest, most powerful low-frequency response. |
|
CAST FRAME WOOFER DESIGN Each 10" woofer features a heavy-duty cast aluminium frame for resonant-free operation. A dual shorting-ring magnet structure eliminates modulation of the magnetic flux, resulting in improved linearity of cone movement. |
 |
Specifications
| Frequency Response | 32Hz – 25kHz ±3dB |
| Sensitivity | 100dB @ 2.83V / 1m |
| Power Handling (Continuous / Peak) | 250W / 1,000W |
| Nominal Impedance | 8 Ohms |
| Minimum Impedance | 3.98 Ohms |
| Crossover Frequency | 1,300Hz |
| Crossover Type | All-New Discrete Components |
| High Frequency Horn | 8.5" Square 90° x 90° Tractrix® Horn |
| High Frequency Driver | 1.75" (4.45cm) Titanium Diaphragm Compression Driver |
| Low Frequency Drivers | Two 10" (25.4cm) Cerametallic™ Cone Woofers |
| Enclosure Type | Dual Chambered, Bass-Reflex via Dual Rear-Firing Tractrix® Ports |
| Inputs | Dual Binding Posts / Bi-Wire / Bi-Amp |
| Finish Options | Ebony, Piano Black, Walnut |
| Height (including plinth) | 49" (124.5cm) |
| Width (including plinth) | 13.875" (35.2cm) |
| Depth (including plinth) | 17.875" (45.4cm) |
| Weight (each) | 97 lbs (44.1kg) |
Caring for your Speakers and Amplifiers
To Keep your equipment safe these are some best practices to note. Please be advised that this is only to reduce the risk of misuse and is not an exhaustive list.
Speakers
- Speaker terminals are marked red and black, ensure your amplifier to the speakers are wired on the same colours
- Ensure no loose speaker wire from the red touches a loose wire from the black as this will lead to a short circuit and damage either the speaker, the amplifier or both.
- Not all speakers are designed to play at max volume, kindly consider the pairing of your amplifier and speakers
- Speaker cabinets cannot be replaced please handle with care.
AV & Stereo Amplifiers
- If your amplifier has HDMI ports, ensure all devices are off before plugging in the HDMI cable
- Turn off the amplifier before swoping out or adding speaker cable
- Amplifiers generate heat, place them in a well ventilated space. if possible avoid having anything on top of the unit.
- adding a surge protector can assist with power dips which are likely to damage your devices. Isotek and Furman are industry standard.
- Dusty environments can sometimes lead to accumulation of dust in the electronic components that might affect heat regulation
Shipping & Returns
- Free shipping on orders over R500 within the country.
- Standard delivery within 2–5 business days. Delays will be communicated. This might vary slightly depending on your location.
- Return items in original condition for a full refund. (unopened state)
- Returns that are open/unboxed will be subject to a handling fee. Refunds will only be processed after testing the unit.