Mola Mola Perca Stereo Power Amplifier
Taxes included.
Shipping calculated at checkout.
Standard delivery within 2–5 business days
Request Quote
Ask for a price, product details or a supply-and-install quote. We'll reply with the details for this exact product.
Perca stereo power amplifier (Single)
The Mola Mola Perca is a stereo power amplifier in Mola Mola's half-size chassis, delivering 150 Watts into 8 Ohm and 300 Watts into 4 Ohm. Priced and sold individually.
Description
Small sized and versatile
Taking the NCORE® technology of parent company Hypex Electronics as a reference point, Mola Mola refined its self-oscillating Class D principle and feedback concept into the proprietary Mola Mola Trajectum platform, which is also used in the Kula integrated amplifier. The ultra-low distortion Class A input stages are built on a separate board together with their own high-performance voltage regulation.
A gain selection switch chooses between 22dB and 28dB to suit a wider range of applications. The Perca has selectable balanced and single-ended inputs, Furutech binding posts and an on/off trigger connector.
- 2x 150W into 8 Ohm, 2x 300W into 4 Ohm
- Proprietary Mola Mola Trajectum Class D platform
- Class A input stages on a separate board with their own voltage regulation
- Selectable gain: 22dB or 28dB
- 128dB signal/noise ratio and <0,0003% distortion (THD and IMD)
- Selectable balanced (XLR) and single-ended (RCA) inputs
- Furutech binding posts and a trigger input
Specifications
| Model | Perca |
| Pack Type | Single |
| Performance | |
| Power | 2x 150W 8Ohm, 2x 300W 4Ohm |
| Output power per channel (both channels driven) | 125 W typical, 8 ohms, measured with 230V mains (user's manual R1) |
| Gain | 22dB or 28dB |
| Signal/noise ratio | 128dB |
| Distortion (THD and IMD) | <0,0003% |
| Input impedance | 100kOhm (product page); 94k Ohm (user's manual R1) |
| Output impedance | 2mOhm (or damping factor >4000) |
| Bandwidth | 100kHz |
| Connections | |
| Analogue inputs | Balanced (stereo pair) and unbalanced (stereo pair), selected by (un)balanced toggle switch |
| Speaker outputs | Binding posts (left and right) |
| Gain switch | High: 28dB, Low: 22dB |
| Trigger input | 2-15V, AC or DC |
| General | |
| Supply voltage | 100-120V / 200 – 240 Volt AC/ 50-60Hz (auto switching) |
| Power consumption | 0,45 Watt (idle), 800 Watt (max power) |
| Dimensions (W × H × D) | 215 × 110 × 340 mm |
| Weight | 5,25 kg |
| Fuse | T8A 250V 5x20 ceramic |
| What's in the box | Power amplifier (1), power cord (1), trigger cable (1) |
Caring for your Speakers and Amplifiers
To Keep your equipment safe these are some best practices to note. Please be advised that this is only to reduce the risk of misuse and is not an exhaustive list.
Speakers
- Speaker terminals are marked red and black, ensure your amplifier to the speakers are wired on the same colours
- Ensure no loose speaker wire from the red touches a loose wire from the black as this will lead to a short circuit and damage either the speaker, the amplifier or both.
- Not all speakers are designed to play at max volume, kindly consider the pairing of your amplifier and speakers
- Speaker cabinets cannot be replaced please handle with care.
AV & Stereo Amplifiers
- If your amplifier has HDMI ports, ensure all devices are off before plugging in the HDMI cable
- Turn off the amplifier before swoping out or adding speaker cable
- Amplifiers generate heat, place them in a well ventilated space. if possible avoid having anything on top of the unit.
- adding a surge protector can assist with power dips which are likely to damage your devices. Isotek and Furman are industry standard.
- Dusty environments can sometimes lead to accumulation of dust in the electronic components that might affect heat regulation
Shipping & Returns
- Free shipping on orders over R500 within the country.
- Standard delivery within 2–5 business days. Delays will be communicated. This might vary slightly depending on your location.
- Return items in original condition for a full refund. (unopened state)
- Returns that are open/unboxed will be subject to a handling fee. Refunds will only be processed after testing the unit.
